Wearable Technology for Monitoring Electrocardiograms (ECGs) in Adults: A Scoping Review.

In the rapidly evolving landscape of continuous electrocardiogram (ECG) monitoring systems, there is a heightened demand for non-invasive sensors capable of measuring ECGs and detecting heart rate variability (HRV) in diverse populations, ranging from cardiovascular patients to sports enthusiasts. Challenges like device accuracy, patient privacy, signal noise, and long-term safety impede the use of wearable devices in clinical practice. This scoping review aims to assess the performance and safety of novel multi-channel, sensor-based biopotential wearable devices in adults. A comprehensive search strategy was employed on four databases, resulting in 143 records and the inclusion of 12 relevant studies. Most studies focused on healthy adult subjects (n = 6), with some examining controlled groups with atrial fibrillation (AF) (n = 3), long QT syndrome (n = 1), and sleep apnea (n = 1). The investigated bio-sensor devices included chest-worn belts (n = 2), wrist bands (n = 2), adhesive chest strips (n = 2), and wearable textile smart clothes (n = 4). The primary objective of the included studies was to evaluate device performance in terms of accuracy, signal quality, comparability, and visual assessment of ECGs. Safety findings, reported in five articles, indicated no major side effects for long-term/continuous monitoring, with only minor instances of skin irritation. Looking forward, there are ample opportunities to enhance and test these technologies across various physical activity intensities and clinical conditions.

Investigation of Non-contact Electrodes for Electrocardiogram Monitoring.

This work investigates the use of an active noncontact electrode to monitor electrocardiogram (ECG) signals in the chest region of the human body across different interface materials. Non-contact electrodes provide an advantage over wet gel electrodes as they do not require direct contact with the skin which can lead to skin irritation. The key aspects and parameters of non-contact electrodes were discussed. Additionally, a printed circuit board (PCB) electrode was designed and prototyped. Experimental evaluations were performed to demonstrate the feasibility of the design as well as the impact of various interface materials. Results showed that R-peaks can be detected through all materials tested. The highest noise levels were observed in polyester, resulting in the highest signal standard deviation, followed by merino and cotton. The patch sensor with just a solder mask as an insulation layer provided the clearest ECG signal, with 100% accuracy on Rpeak detection.Clinical relevance- Non-contact electrodes offer a more comfortable solution for long-term heart monitoring with minimal discomfort due to less skin irritation when compared to conventional electrodes.

The effects of tissue proportions on blood volume change-induced variations using bio-impedance analysis: a simulation study.

Bioimpedance Analysis (BIA) along the radial artery has been widely investigated for hemodynamic monitoring. However, its applicability to different body type populations still lacks sufficient research. The Finite Element Method (FEM) was performed on three different wrist models using ANSYS HFSS, aiming to reveal the influences of different fat and muscle proportions on the sensitivity of blood volume change-induced bioimpedance change. The simulation results confirmed that the current density in each tissue mainly depended on the conductivity of tissues. The higher conductivity of the tissue, the higher current density inside said tissue. The amounts of flowing current were decided by both volume and conductivity of tissues. Moreover, increasing the fat layer thickness from 4 mm to 6 mm raised simulated impedance from 86.82 Ω to 100.39 Ω and impedance change from 0.63 Ω to 1.55 Ω. However, a higher muscle proportion occupied more injected current from the blood and resulted in lower impedance change. Therefore, for the overweight population, the placement of BIA is recommended to avoid the muscular body parts for the acquirement of better-quality pulse waves.Clinical Relevance-This establishes the bio-impedance analysis should avoid the muscular body parts for a better blood pulse wave quality for overweight populations.

A Pilot Study Examining the Dielectric Response of Human Forearm Tissues.

This work aims to describe the dielectric behaviors of four main tissues in the human forearm using mathematical modelling, including fat, muscle, blood and bone. Multi-frequency bioimpedance analysis (MF-BIA) was initially performed using the finite element method (FEM) with a 3D forearm model to estimate impedance spectra from 10 kHz to 1 MHz, followed by a pilot study involving two healthy subjects to characterize the response of actual forearm tissues from 1 kHz to 349 kHz. Both the simulation and experimental results were fitted to a single-dispersion Cole model (SDCM) and a multi-dispersion Cole model (MDCM) to determine the Cole parameters for each tissue. Cole-type responses of both simulated and actual human forearms were observed. A paired t-test based on the root mean squared error (RMSE) values indicated that both Cole models performed comparably in fitting both simulated and measured bioimpedance data. However, MDCM exhibited higher accuracy, with a correlation coefficient (R2) of 0.99 and 0.89, RMSE of 0.22 Ω and 0.56 Ω, mean difference (mean ± standard deviation) of 0.00 ± 0.23 Ω and -0.28 ± 0.23 Ω, and mean absolute error (MAE) of 0.0007 Ω and 0.2789 Ω for the real part and imaginary part of impedance, respectively. Determining the electrical response of multi-tissues can be helpful in developing physiological monitoring of an organ or a section of the human body through MF-BIA and hemodynamic monitoring by filtering out the impedance contributions from the surrounding tissues to blood-flow-induced impedance variations.

The Investigation of Bio-impedance Analysis at a Wrist Phantom with Two Pulsatile Arteries.

PURPOSE: Bio-impedance analysis (BIA) has been widely investigated for hemodynamic monitoring. However, previous works rarely modelled two synchronously pulsatile arteries (representing the radial and ulnar arteries) in the wrist/forearm model. This work aims to clarify and quantify the influences of two pulsatile arteries on BIA. METHODS: First, two blood-filled arteries were structured in a 3D wrist segment using the finite element method (FEM). Afterwards, an easy-to-produce two-arteries artificial wrist was fabricated with two components: gelatine-based surrounding tissue phantom and saline blood phantom. A syringe driver was utilised to constrict the arteries, and the impedance signals were measured using a Multi-frequency Impedance Analyser (MFIA). RESULTS: Both simulation and experimental results demonstrated the non-negligible influences of the ulnar artery on the overall BIA, inducing unwanted resistance changes to the acquired signals from the radial artery. The phantom experiments revealed the summation of the individual resistance changes caused by a single pulsatile artery was approximately equal to the measured resistance change caused by two synchronously pulsatile arteries, confirming the measured impedance signal at the wrist contains the pulsatile information from both arteries. CONCLUSION: This work is the first simulation and phantom investigation into two synchronously pulsatile arteries under BIA in the distal forearm, providing a better insight and understanding in the morphology of measured impedance signals. Future research can accordingly select either a small spacing 4-spot electrode configuration for a single artery sensing or a band electrode configuration for overall pulsatile arteries sensing. A more accurate estimation of blood volume change and pulse wave analysis (PWA) could help to develop cuffless blood pressure measurement (BPM).

Clinical and histopathological features of rostrolateral nasal alar arteriopathy of German shepherd dogs.

BACKGROUND: Dermal arteritis of the nasal philtrum (DANP) has been described in large-breed dogs. OBJECTIVES: To characterise clinically distinct, discrete fissures of the dorsolateral nasal alae associated with severe bleeding in German shepherd dogs (GSDs). ANIMALS: Fourteen privately owned GSDs with linear rostrolateral nasal alar fissures and a histopathological diagnosis of nasal vasculopathy. MATERIALS AND METHODS: Retrospective analysis of medical records and histological slides. RESULTS: Mean age of onset was 6 years. Before biopsy, episodic arteriolar bleeding was noted in 11 of the 14 (79%) dogs. Slide analysis revealed enlarged nasal arterioles with expanded vascular tunics and luminal stenosis beneath ulcers. Histopathological lesions consistent with mucocutaneous pyoderma and/or facial discoid lupus erythematosus were present in 5 of the 14 (36%) dogs. Enlarged arterioles stained blue with Alcian blue and Masson's trichrome stains, consistent with deposition of mucin and collagen, respectively. Immunohistochemical stains (neutrophil myeloperoxidase, IBA1, CD3) were performed. CD3 was negative for all dogs, whilst neutrophil myeloperoxidase and IBA1 occasionally demonstrated intramural neutrophils (3 of the 14 dogs, 21%) or histiocytes (1 of the 14 dogs, 7%) in altered vessels, respectively. All dogs underwent medical management and/or surgical excision. Treatments included tacrolimus, prednisone, ciclosporin-modified, pentoxifylline, antimicrobials and doxycycline/niacinamide. No dogs were treated with antimicrobials alone. For seven dogs with long-term follow-up, treatment response was complete in five (71%) and partial in two (29%), with six of the seven (86%) receiving immunomodulatory treatments to maintain remission. CONCLUSION AND CLINICAL RELEVANCE: Nasal alar arteriopathy of GSDs shares histopathological changes with DANP. It has characteristic clinical and histopathological features and appears amenable to immunomodulation.

Mechanisms of gill-clogging by hagfish slime.

Hagfishes defend themselves from gill-breathing predators by producing large volumes of fibrous slime when attacked. The slime's effectiveness comes from its ability to clog predators' gills, but the mechanisms by which hagfish slime clogs are uncertain, especially given its remarkably dilute concentration of solids. We quantified the clogging performance of hagfish slime over a range of concentrations, measured the contributions of its mucous and thread components, and measured the effect of turbulent mixing on clogging. To assess the porous structure of hagfish slime, we used a custom device to measure its Darcy permeability. We show that hagfish slime clogs at extremely dilute concentrations like those found in native hagfish slime and displays clogging performance that is superior to three thickening agents. We report an extremely low Darcy permeability for hagfish slime, and an effective pore size of 10-300 nm. We also show that the mucous and thread components play distinct yet crucial roles, with mucus being responsible for effective clogging and low permeability and the threads imparting mechanical strength and retaining clogging function over time. Our results provide new insights into the mechanisms by which hagfish slime clogs gills and may inspire the development of ultra-soft materials with novel properties.

Hybrid CNN-SVR Blood Pressure Estimation Model Using ECG and PPG Signals.

Continuous blood pressure (BP) measurement is vital in monitoring patients' health with a high risk of cardiovascular disease. The complex and dynamic nature of the cardiovascular system can influence BP through many factors, such as cardiac output, blood vessel wall elasticity, circulated blood volume, peripheral resistance, respiration, and emotional behavior. Yet, traditional BP measurement methods in continuously estimating the BP are cumbersome and inefficient. This paper presents a novel hybrid model by integrating a convolutional neural network (CNN) as a trainable feature extractor and support vector regression (SVR) as a regression model. This model can automatically extract features from the electrocardiogram (ECG) and photoplethysmography (PPG) signals and continuously estimates the systolic blood pressure (SBP) and diastolic blood pressure (DBP). The CNN takes the correct topology of input data and establishes the relationship between ECG and PPG features and BP. A total of 120 patients with available ECG, PPG, SBP, and DBP data are selected from the MIMIC III database to evaluate the performance of the proposed model. This novel model achieves an overall Mean Absolute Error (MAE) of 1.23 ± 2.45 mmHg (MAE ± STD) for SBP and 3.08 ± 5.67 for DBP, all of which comply with the accuracy requirements of the AAMI SP10 standard.

A Hydrogel-Based Electronic Skin for Touch Detection Using Electrical Impedance Tomography.

Recent advancement in wearable and robot-assisted healthcare technology gives rise to the demand for smart interfaces that allow more efficient human-machine interaction. In this paper, a hydrogel-based soft sensor for subtle touch detection is proposed. Adopting the working principle of a biomedical imaging technology known as electrical impedance tomography (EIT), the sensor produces images that display the electrical conductivity distribution of its sensitive region to enable touch detection. The sensor was made from a natural gelatin hydrogel whose electrical conductivity is considerably less than that of human skin. The low conductivity of the sensor enabled a touch-detection mechanism based on a novel short-circuiting approach, which resulted in the reconstructed images being predominantly affected by the electrical contact between the sensor and fingertips, rather than the conventionally used piezoresistive response of the sensing material. The experimental results indicated that the proposed sensor was promising for detecting subtle contacts without the necessity of exerting a noticeable force on the sensor.

Schoolyard Biodiversity Determines Short-Term Recovery of Disturbed Skin Microbiota in Children.

Creating biodiverse urban habitat has been proposed, with growing empirical support, as an intervention for increasing human microbial diversity and reducing associated diseases. However, ecological understanding of urban biodiversity interventions on human skin microbiota remains limited. Here, we experimentally test the hypotheses that disturbed skin microbiota recover better in outdoor schoolyard environments and that greater biodiversity provides a greater response. Repeating the experiment three times, we disturbed skin microbiota of fifty-seven healthy 10-to-11-year-old students with a skin swab (i.e., cleaning), then exposed them to one school environment-either a 'classroom' (n = 20), 'sports field' (n = 14), or biodiverse 'forest' (n = 23)-for 45 min. Another skin swab followed the exposure to compare 'before' and 'after' microbial communities. After 45 min, the disturbance immediately followed by outdoor exposure, especially the 'forest', had an enriching and diversifying effect on skin microbiota, while 'classroom' exposure homogenised inter-personal variability. Each effect compounded over consecutive days indicating longer-term exposure outcomes. The experimental disturbance also reduced the core skin microbiota, and only outdoor environments were able to replenish lost species richness to core membership (n species > 50% prevalent). Overall, we find that environmental setting, especially including biodiversity, is important in human microbiota recovery periods and that the outdoors provide resilience to skin communities. This work also has implications for the inclusion of short periods of outside or forest exposure in school scheduling. Future investigations of the health impacts of permanent urban biodiversity interventions are needed.

Shifts in floristic composition and structure in Australian rangelands.

Monitoring shifts in vegetation composition over time is essential for tracking biodiversity changes and for designing ecosystem management strategies. In Australia, the Terrestrial Ecosystem Research Network (TERN) provides a continent-wide network of monitoring sites (AusPlots) that can be used to assess the shifts in vegetation composition and structure of Australian Major Vegetation Groups (MVGs). Here we use time-series site data to quantify the extent and rate of MVG shifts between repeat visits and to recommend the most appropriate sampling frequency for specific MVGs. The research area spans a ~1,500 km latitudinal gradient within south/central Australia from arid rangelands in the north to Mediterranean vegetation in the south. The standardized AusPlots protocol was employed to repeatedly survey 103 one-hectare plots, assessed between 2011 and 2019. Floristic and growth form dissimilarities between visits were calculated with distance metrics and then regressed against survey interval. Multivariate ordination was used to explore temporal floristic shifts. Rank-dominance curves were used to display variations in species' importance. Between repeated visits, sites exhibited high variability for all vegetation parameters and trajectories. However, several trends emerged: (a) Species composition moved away from baseline linearly with intervals between surveys. (b) The rate of species turnover was approximately double in communities that are herbaceous versus woody-dominated. (c) Species abundances and growth forms shift at different speeds. All floristic and structural metrics shifted between re-visits, with varying magnitude and speed, but herbaceous-dominated plots showed higher floristic dynamism. Although the expanse, logistics, and the short time between visits constrained our analysis and interpretation, our results suggest that shorter revisit intervals may be appropriate for herbaceous compared to woody systems to track change most efficiently.

Comprehensive Understanding of Foot Development in Children Using Capacitive Textile Sensors.

Knowledge of foot growth can provide information on the occurrence of children's growth spurts and an indication of the time to buy new shoes. Podiatrists still do not have enough evidence as to whether footwear influences the structural development of the feet and associated locomotor behaviours. Parents are only willing to buy an inexpensive brand, because children's shoes are deemed expendable due to their rapid foot growth. Consumers are not fully aware of footwear literacy; thus, views of consumers on children's shoes are left unchallenged. This study aims to embed knitted smart textile sensors in children's shoes to sense the growth and development of a child's feet-specifically foot length. Two prototype configurations were evaluated on 30 children, who each inserted their feet for ten seconds inside the instrumented shoes. Capacitance readings were related to the proximity of their toes to the sensor and validated against foot length and shoe size. A linear regression model of capacitance readings and foot length was developed. This regression model was found to be statistically significant (p-value = 0.01, standard error = 0.08). Results of this study indicate that knitted textile sensors can be implemented inside shoes to get a comprehensive understanding of foot development in children.

The Development of a Built-In Shoe Plantar Pressure Measurement System for Children.

There is a rapid increase in plantar pressure from the infant to toddler stage, yet little is known about the reasons for this change. More information about plantar pressure distribution can help clinicians identify early-stage foot-related diseases that may occur during transitions from childhood to adulthood. This information also helps designers create shoes that adapt to different needs. This research describes the development of a low-cost, built-in shoe plantar pressure measurement system that determines foot pressure distribution in toddlers. The study aimed to improve and provide data on pressure distribution during foot growth. This was accomplished by implementing a plantar pressure capacitive measurement system within shoes. The capacitive sensors were laminated using a copper tape sheet on plastic backing with adhesive, elastomer layers, and a combination of conductive and non-conductive fabrics. Constructed sensors were characterized using compression tests with repeated loads. Results demonstrated that the sensors exhibited rate-independent hysteresis in the estimation of pressure. This enabled a calibration model to be developed. The system can mimic more expensive plantar pressure measurement systems at lower fidelity. This emerging technology could be utilized to aid clinicians, researchers, and footwear designers interested in how pressure distribution changes from infants to toddlers.

A scoping review protocol on in vivo human plastic exposure and health impacts.

BACKGROUND: Global plastic production has increased exponentially since the 1960s, with more than 6300 million metric tons of plastic waste generated to date. Studies have found a range of human health outcomes associated with exposure to plastic chemicals. However, only a fraction of plastic chemicals used have been studied in vivo, and then often in animals, for acute toxicological effects. With many questions still unanswered about how long-term exposure to plastic impacts human health, there is an urgent need to map human in vivo research conducted to date, casting a broad net by searching terms for a comprehensive suite of plastic chemical exposures and the widest range of health domains. METHODS: This protocol describes a scoping review that will follow the recommended framework outlined in the 2017 Guidance for the Conduct of Joanna Briggs Institute (JBI) Scoping Reviews, to be reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) Checklist. A literature search of primary clinical studies in English from 1960 onwards will be conducted in MEDLINE (Ovid) and EMBASE (Ovid) databases. References eligible for inclusion will be identified through a quality-controlled, multi-level screening process. Extracted data will be presented in diagrammatic and tabular form, with a narrative summary addressing the review questions. DISCUSSION: This scoping review will comprehensively map the primary research undertaken to date on plastic exposure and human health. Secondary outputs will include extensive databases on plastic chemicals and human health outcomes/impacts. SYSTEMATIC REVIEW REGISTRATION: Open Science Framework (OSF)-Standard Pre-Data Collection Registration, https://archive.org/details/osf-registrations-gbxps-v1 , https://doi.org/10.17605/OSF.IO/GBXPS.

Towards Estimating Arterial Diameter Using Bioimpedance Spectroscopy: A Computational Simulation and Tissue Phantom Analysis.

This paper improves the accuracy of quantification in the arterial diameter-dependent impedance variance by altering the electrode configuration. The finite element analysis was implemented with a 3D human wrist fragment using ANSYS Electronics Desktop, containing fat, muscle, and a blood-filled radial artery. Then, the skin layer and bones were stepwise added, helping to understand the dielectric response of multi-tissues and blood flow from 1 kHz to 1 MHz, the current distribution throughout the wrist, and the optimisation of electrode configurations for arterial pulse sensing. Moreover, a low-cost wrist phantom was fabricated, containing two components: the surrounding tissue simulant (20 wt % gelatine power and 0.017 M sodium chloride (NaCl) solution) and the blood simulant (0.08 M NaCl solution). The blood-filled artery was constricted using a desktop injection pump, and the impedance change was measured by the Multi-frequency Impedance Analyser (MFIA). The simulation revealed the promising capabilities of band electrodes to generate a more uniform current distribution than the traditional spot electrodes. Both simulation and phantom experimental results indicated that a longer spacing between current-carrying (CC) electrodes with shorter spacing between pick-up (PU) electrodes in the middle could sense a more uniform electric field, engendering a more accurate arterial diameter estimation. This work provided an improved electrode configuration for more accurate arterial diameter estimation from the numerical simulation and tissue phantom perspectives.

The Ideal Time to Administer Pre-operative Antibiotics: Current and Future Practices.

Background Preoperative antibiotic prophylaxis is a method of administering antibiotics prior to surgical procedures to decrease surgical site infections. The Center for Disease Control and Prevention (CDC) guidelines recommend administering the chosen antibiotic within 60 minutes prior to incision. However, further research can be conducted to explore and determine a more precise and ideal time for preoperative antibiotic prophylaxis. Methods This paper explores the most used antibiotics within the Department of Neurosurgery at Arrowhead Regional Medical Center, which are cefazolin and clindamycin, and pinpoints the ideal time of preoperative antibiotic prophylaxis based on peak serum levels. It will present and discuss findings by analyzing the pharmacokinetic profiles of each antibiotic, focusing on the minimal inhibitory concentration (MIC), time to peak in the tissue, and duration of action to determine the appropriate time for redosing. Results Our findings indicate that based on the pharmacological profiles, the ideal time to administer preoperative antibiotics for cefazolin is 40 minutes prior to incision, and for clindamycin is 45 minutes prior to incision. Conclusions This study may help guide clinical decision-making and lead to minimizing the rate of infections and decreasing hospital stay.

Tetrazole as a Carboxylic Acid Isostere and the Synthesis of All Amine-Based Polyampholytes.

A new family of polyampholytes (PAMs) is described in which both the basic and acidic groups are based on nitrogen functional groups. Reversible addition-fragmentation chain transfer-prepared poly(pentafluorophenyl acrylate) is quantitatively modified sequentially with 3-picolylamine and 5-aminotetrazole, yielding the new well-defined statistical PAMs. Successful formation of the PAMs is confirmed via a combination of 19 F and 13 C NMR spectroscopy and FTIR. Aqueous electrophoresis indicates isoelectric points (pI) between 2.9 and 4.4 depending on copolymer composition. However, the pI is somewhat insensitive to the copolymer composition, a feature attributed to the similarity of the pKa s of the acid tetrazole species and the conjugate acid of the pyridyl repeat units.

Rare genera differentiate urban green space soil bacterial communities in three cities across the world.

Vegetation complexity is potentially important for urban green space designs aimed at fostering microbial biodiversity to benefit human health. Exposure to urban microbial biodiversity may influence human health outcomes via immune training and regulation. In this context, improving human exposure to microbiota via biodiversity-centric urban green space designs is an underused opportunity. There is currently little knowledge on the association between vegetation complexity (i.e. diversity and structure) and soil microbiota of urban green spaces. Here, we investigated the association between vegetation complexity and soil bacteria in urban green spaces in Bournemouth, UK; Haikou, China; and the City of Playford, Australia by sequencing the 16S rRNA V4 gene region of soil samples and assessing bacterial diversity. We characterized these green spaces as having 'low' or 'high' vegetation complexity and explored whether these two broad categories contained similar bacterial community compositions and diversity around the world. Within cities, we observed significantly different alpha and beta diversities between vegetation complexities; however, these results varied between cities. Rare genera (<1% relative abundance individually, on average 35% relative abundance when pooled) were most likely to be significantly different in sequence abundance between vegetation complexities and therefore explained much of the differences in microbial communities observed. Overall, general associations exist between soil bacterial communities and vegetation complexity, although these are not consistent between cities. Therefore, more in-depth work is required to be done locally to derive practical actions to assist the conservation and restoration of microbial communities in urban areas.